Modify symbols
Introduction

The Symbols tab is used to define advanced features of the legend being worked with.

When creating symbols for a legend it is important point to bear in mind the type of layer the symbols are being created for. This is important because there are two different types of vector layers to consider when making the symbols:

tipos_de_leyendas/tipos-de-leyendas.img/tipos-leyendas_en.png

Single geometry layer

simbologia/simbologia.img/propiedades_simb_multigeom_en.png

Multigeometry layer

In this case, there is a single Symbols tab where you can configure the symbol properties of the points, lines and polygons separately. Points are configured under the Marker tab, lines under the Line tab, and polygons under the Fill tab.

simbologia/simbologia.img/pestanyas_multigeometria_en.png

Tabs corresponding to the symbols for multigeometry layers

With this clarified, we can now look at symbol properties while taking the geometry type into account.


Symbol editor
Introduction

From the layer menu, in properties, you can access the Symbology section. It is possible to change or configure a new symbol clicking on “Select symbol” where you will find different configuration options.

Click on the “Select symbol” button and then on the “Properties” button. The window which opens will allow you to edit the properties of the symbol. This is the same window that will open if you click on “New”.

simbologia.img/Propiedades_simbolo_poligono_es.png

By default gvSIG symbolises the layers with 'unique symbols'.

As well as the basic options that can been seen at first glance, such as colour, breadth and the type of units in which the symbol is to be represented, you can also edit the properties of the element. Next a classification of the properties of an element is made according to its geometry type.

The dialogue boxes that open have common sections and others that are specific to the type of geometry, we see them as follows:

Common characteristics:

simbologia/simbologia.img/simbo_carac_comunes_es.png.PNG

When a symbol, is configured from its Properties, be it a point, a line or a polygon, it can be defined:

Under colour you find a scrolling bar, which allows you to play with the grade of the transparency of the elements. This way, you can superimpose polygon layers without interfering with its display.

simbologia_avanzada/simbologia/simbologia.img/Unidades_es.png

We can also specify if they are units “on the map” (the size would depend on where the zoom is set) or “on paper” (it will have a set size, both on screen and when it is printed).

Specific characteristics of each type of geometry:

Symbol type:

Mercator Lines Fill-in
Of character Simple line Simple fill-in
Simple mercator Mercator lines Image fill-in
Mercator image Line image Mercators fill-in
Of character Simple line Line fill-ins
Of character Simple line Gradient fill-ins

The mercators represent the layers of the points.

The lines represent the linear layers.

The fill-ins represent the polygon layers.

All three together represent the multi-geometric layers.


Marker or specific symbol

You can chose between different Markers that are shown in “Type of Marker”.

Simple Marker:

In “Marker style”, select the marker (circle, square, cross...). You can modify its size, angle and colour as well as being able to move it around the ordinate and abscissa axis.

simbologia.img/Propiedades_simbolo_punto_es.png

Marker made up of simple markers: you can make up a marker from various other simple markers by “overlapping” one over the other, this is done by clicking on “add layer”, where each layer is a simple marker. You can delete or change the order of the layers by clicking on “Delete layer” or “Tidy layers”. In the following image there is an example of a symbol made up of various simple markers.

simbologia.img/Marcador_simple_es.png

You can make the symbols stand out by choosing the colour of the outline and giving it the same transparency as the fill-in of the symbols. To give the symbol an outline you must check the “Use outline” box. You can move the symbol around the ordinate and abscissa axis or leave it in the centre.

Character marker:

You can use the different alphanumeric character types to create a symbol, you can modify its size, angle and colour as well as being able to move it around the ordinate and abscissa axis.

simbologia.img/simb_punto_caracter_es.png

Picture marker:

You can chose whichever image you want to represent the symbol. This image can be in different formats (jpg, png,bmp, svg..., you can even download an image from the internet, as long as the format is supported by gvSIG). To add it just select the path where the image is saved by clicking on “Examine”, next to "Image file".

Also, you have the option of selecting a different image, which is to represent the geometries, when they have been selected and are in view. Do this by entering the path of the image in "Selected image".

You can move the symbol around the ordinate and abscissa axis or leave it in the centre.

simbologia.img/simb_punto_imagen_es.png

Lines or linear symbols

You can choose between different Mercator that are shown in the “Mercator type”.

Simple line symbol:

You can choose the colour of the line, its breadth and its movement (offset), as well as having the option to modify its opaqueness and, of course, its measurement units.

simbologia.img/Propiedades_simbolo_linea_es.png

As well as that the layers of the points can make up one line with various lines “overlapping” using the same method than which in the layers of points.

In the “Line properties” tab you can generate different types of lines, continuous lines which gvSIG has as default, or discontinuous lines, establishing the fill-in pattern you choose. For this a rule is made available from which you can design your own patterns.

simbologia.img/propiedades_linea_es.png

Click on the grey section which is on the rule and drag right, next click on the rule, in the rule section you want, and a black section will appear which you can eliminate if you “click” on it again. This way you can successively add sections which can design your line.

If you want to delete the designed line click on “clean”.

In the “Arrow decorations” tab you can turn a line into an arrow. To make this happen check the “Use decoration” box.

simbologia.img/decoracion_flecha_es.png

The options available to decorate the arrow are:

Mercator line symbols:

You can use different font types, such as characters, to create a symbol, modifying its breadth and separation.

simbologia.img/simb_linea_marcadores_es.png

Image line symbol:

You can chose the image you want to make up the line, this image can be in different formats (jpg, png, bmp, svg...). To add the image you only have to select the path to where the image is saved by clicking on “Examine”. You can set the breadth and scale the image in “X” and “Y”.

simbologia.img/simb_linea_imagen_es.png

Fills for polygon symbols

The following fill-in Types for polygonal geometry layers are available.

Simple fill-in:

You can choose the polygon fill-in colour and its opaqueness.

simbologia.img/Propiedades_simbolo_poligono_es.png

Click on the button where you can see the outline and the simple symbol of a line properties menu will open. Here you can configure the outline of the polygon as if it were a line.

You can give the outline the breadth and opaqueness you want.

Fill-in made up of simple mercators: You can make up a fill-in from various simples by “overlapping” them, it is the same method as that which is explained in the layers of points and lines.

Mercator fill-ins:

You can give the polygon a fill-in made up of different types of mercators, such as punctual, linear, image... with their own characteristics.

The fill-in can be organised in an aleatory way or in a regular mesh way.

There is the option to make compositions with various layers.

simbologia_avanzada/simbologia/simbologia.img/relleno-marcador.png

Line fill-in:

Instead of filling the polygon in with specific mercators you can do so with lines, you can give them the same properties that you gave a line layer, including the outlines.

As in all sections, here you can also create a composition through different layers.

simbologia_avanzada/simbologia/simbologia.img/relleno-lineas.png

Image fill-in:

You can fill-in the polygon of images and set their inclinations by indicating the angle and you can also scale them.

The way to fill-in the polygon of images is by giving them the specific route to the image. These images can be framed, click on “Outline” and select the line you want.

simbologia_avanzada/simbologia/simbologia.img/naranjos.png

Gradient fill-in:

The possibility of gradually filling-in is available, you can select different options to configure the gradual scale of the colour, these options are:

simbologia.img/simb_relleno_gradiente_es.png

Symbol levels

As you can see in the following image, a symbol has two buttons that configure it, “Select Symbol” where you can define its properties, and “Symbology Levels” which allows us to establish the exact order the different layers has created the symbol.

simbologia.img/Propiedades_simbologia_es.png

It is important to establish an order when different geometries of the same layer intersect, as can be the case in the unique Value of legends for line layers, for example, where the order established could be of interest so that some symbols are above others.

“0” value corresponds to the symbol drawn at that bottom, “1” is drawn above that and so forth successively.

simbologia.img/niveles_simbologia_es.png

Labels that show in ToC

You can give whatever name you want to the different legend values, to see them in the Table of Contents.

simbologia.img/simb_etiqueta_TOC_es.png

In the previous image we saw a legend by a unique Symbol, but it is also possible to give each of the legend values a label name by Interval, unique Value, etc. (or modify it, from each of the text boxes), as well as being able to modify the order with which theses values appear in ToC (throught the up/down arrows):

simbologia_avanzada/tipos_de_leyendas/tipos-de-leyendas.img/valores_unicos_es.png

Library of Symbols

Upon installing gvSIC a folder called 'Symbols' is created in the user directory, here you can save different types of symbols (punctual, linear, polygonal...). In other words, it works as a library of symbols. Also, gvSIG includes, by default, a set of symbols from each type of geometry, saving them in the above mentioned folder.

simbologia.img/simb_mapinfo_es.png

Once a symbol is created, from the “Symbology select” menu, click on “Save”.

A window will open, allowing you to save the symbols on a specific route, inside the “Symbols” folder.

simbologia.img/biblioteca_es.PNG

Name the symbol and click on save. Make sure you have saved the symbol as a .sym file and that when you open another layer of the same type of geometry, the library of symbols which has been saved appears.

tipos_de_leyendas/tipos-de-leyendas.img/biblio.PNG

Cached time 11/22/13 03:30:32 Clear cache and reload